Every Cobb & Co hardside suitcase has an integrated TSA-approved combination lock. TSA locks let airport security in the USA open and re-lock your case with a master key, so they don't need to cut the lock. Here's how to set your own code, change it, and what to do if you forget it.
Good to know: our TSA locks are factory-set to 000.
How to set your TSA lock combination
- Open the lock at 000. Make sure all three dials read 0-0-0 and slide the lock button to open it.
- Find the reset button. It's a small button or pin hole on the side or underneath the lock body. On some models it's recessed, so use the tip of a pen.
- Press and hold the reset button and, while holding it, turn the dials to your new three-digit code.
- Release the reset button. Your new code is now set.
- Test it before you pack. Scramble the dials, dial your new code and check the lock opens. Do this with the case open, so you can't lock yourself out.
Write your code down somewhere safe, away from the suitcase, such as a note on your phone.
How to change your code later
Follow the same steps, but start by opening the lock with your current code instead of 000. Then press and hold the reset button, dial the new code and release.
Forgot your combination?
Don't force or cut the lock. Work through every combination from 000 to 999: start at 000, turn the right-hand dial through 0–9, then move the middle dial up one and repeat. It takes about 15 minutes. Once it opens, reset it to a code you'll remember.
Still stuck? Email sales@gabee.com.au with your suitcase model and we'll help.
Travel tips for TSA locks
- Flying to or through the USA? Use your TSA lock. Security can open and re-lock it without damage.
- Don't over-pack expandable cases. Strain on the zip can make the lock button stiff.
- Lock the zip pullers fully into the lock slots until they click.
- Before every trip, check the code still works at home.
Shop carry-on luggage, medium, large suitcases and luggage sets, or read more in our luggage FAQs.
TSA lock FAQs
What is the factory code on a Cobb & Co TSA lock?
Our TSA combination locks are factory-set to 000.
How do I set my own TSA lock combination?
With the lock open at 000, press and hold the reset button (use a pen tip if it's recessed), turn the dials to your new three-digit code, then release the button. Scramble the dials and test the new code before you close the case.
How do I change my TSA combination later?
Repeat the same steps, starting from your current code instead of 000: open the lock with your code, press and hold the reset button, set the new code and release.
What if I forget my TSA lock combination?
Work through every combination from 000 to 999, moving the last dial first. It takes about 15 minutes and saves breaking the lock. Then reset to a code you'll remember.
Why does my TSA lock have a keyhole but no key?
The keyhole is for airport security staff, who carry TSA master keys so they can inspect and re-lock your bag without cutting the lock. You open it with your combination.